Dell PowerEdge R7525 EMC Installation and Service Manual - Page 59
Removing a cooling fan
View all Dell PowerEdge R7525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Figure 35. Installing the cooling fan cage assembly Next steps 1. If removed, install the air shroud. 2. Follow the procedure listed in After working inside your system on page 41. Removing a cooling fan Prerequisites 1. Follow the safety guidelines listed in the Safety instructions on page 40. 2. Follow the procedure listed in Before working inside your system on page 41. 3. If installed, remove the air shroud. Steps Press the orange release tab and lift the cooling fan to disconnect the fan from the connector on the system board. NOTE: The procedure to remove standard, high-performance, or very high-performance fan is same. WARNING: Ensure not to tilt or rotate the cooling fan while removing from the system. Installing and removing system components 59