Dell PowerEdge R7525 EMC Installation and Service Manual - Page 58
Installing the cooling fan cage assembly
![]() |
View all Dell PowerEdge R7525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Figure 34. Removing the cooling fan cage assembly Next steps 1. Install the cooling fan cage assembly. Installing the cooling fan cage assembly Prerequisites 1. Follow the safety guidelines listed in the Safety instructions on page 40. CAUTION: Ensure that the cables inside the system are correctly installed and retained by the cable retention bracket before installing the cooling fan cage assembly. Incorrectly installed cables may get damaged. 2. Follow the procedure listed in Before working inside your system on page 41. 3. If installed, remove the air shroud. Steps 1. Align the guide rails on the cooling fan cage assembly with the standoffs on the system. 2. Lower the cooling fan cage assembly into the system until the cooling fan cage connectors engage with the connectors on the system board. 3. Press the release levers to lock the cooling fan cage assembly into the system. 58 Installing and removing system components
![](/manual_guide/products/dell-poweredge-r7525-emc-installation-service-manual-faf6127/58.png)