Dell PowerEdge R7525 EMC Installation and Service Manual - Page 185
NIC port specifications, Serial connector specifications, IDSDM
![]() |
View all Dell PowerEdge R7525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
NIC port specifications The PowerEdge R7525 system supports up to two 10/100/1000 Mbps Network Interface Controller (NIC) ports embedded on the LAN on Motherboard (LOM) and integrated on the optional OCP cards. Table 70. NIC port specification Feature LOM card OCP card (OCP 3.0) Specifications 1 GB x 2 1 GbE x 4, 10 GbE x 2, 25 GbE x 2, 25 GbE x 4, 50 GbE x 2, 100 GbE x 2 Serial connector specifications The PowerEdge R7525 system supports one optional card type serial connector, which is a 9-pin connector, Data Terminal Equipment (DTE), 16550-compliant. The optional serial connector card is installed similar to an expansion card filler bracket. VGA ports specifications The PowerEdge R7525 system supports two DB-15 VGA port one each on the front and back panels. IDSDM The PowerEdge R7525 system supports Internal Dual SD module (IDSDM). The IDSDM supports two SD cards and is available in the following configurations: Table 71. Supported SD card storage capacity IDSDM card • 16 GB • 32 GB • 64 GB NOTE: One IDSDM card slot is dedicated for redundancy. NOTE: Use Dell EMC branded SD cards that are associated with the IDSDM configured systems. Video specifications The PowerEdge R7525 system supports integrated Matrox G200 graphics controller with 16 MB of video frame buffer. Table 72. Supported front video resolution options Resolution 1024 x 768 Refresh rate (Hz) 60 Color depth (bits) 8, 16, 32 1280 x 800 60 8, 16, 32 1280 x 1024 60 8, 16, 32 1360 x 768 60 8, 16, 32 1440 x 900 60 8, 16, 32 Technical specifications 185
![](/manual_guide/products/dell-poweredge-r7525-emc-installation-service-manual-faf6127/185.png)