Dell PowerEdge R7525 EMC Installation and Service Manual - Page 64
Installing a drive blank, Removing the drive carrier
![]() |
View all Dell PowerEdge R7525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Figure 40. Removing a drive blank Next steps 1. Replace the drive blank. Installing a drive blank Prerequisites 1. Follow the safety guidelines listed in the Safety instructions on page 40. 2. If installed, remove the front bezel. Steps Insert the drive blank into the drive slot until the release button clicks into place. Figure 41. Installing a drive blank Next steps 1. If removed, install the front bezel. Removing the drive carrier Prerequisites 1. Follow the safety guidelines listed in the Safety instructions on page 40. 2. If installed, remove the front bezel. 3. Using the management software, prepare the drive for removal. If the drive is online, the green activity or fault indicator blinks while the drive is powering off. When the drive indicators are off, the drive is ready for removal. For more information, see the documentation for the storage controller. 64 Installing and removing system components
![](/manual_guide/products/dell-poweredge-r7525-emc-installation-service-manual-faf6127/64.png)