Dell PowerEdge T105 Hardware Owner's Manual (PDF) - Page 16
Connecting External Devices, NIC Indicator Codes - drivers
View all Dell PowerEdge T105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Connecting External Devices When connecting external devices to your system, follow these guidelines: • Most devices must be connected to a specific connector and device drivers must be installed before the device operates properly. (Device drivers are normally included with your operating system software or with the device itself.) See the documentation that accompanied the device for specific installation and configuration instructions. • Always attach an external device while your system and the device are turned off. Next, turn on any external devices before turning on the system (unless the documentation for the device specifies otherwise). See "Using the System Setup Program" on page 31 for information about enabling, disabling, and configuring I/O ports and connectors. NIC Indicator Codes The NIC on the back panel has an indicator that provides information on network activity and link status. See Figure 1-3. Table 1-3 lists the NIC indicator codes. Figure 1-3. NIC Indicators 1 2 1 link indicator 2 activity indicator 16 About Your System