Dell PowerEdge T105 Hardware Owner's Manual (PDF) - Page 90
Installing the System Battery, Using the System Setup Program
View all Dell PowerEdge T105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Figure 3-26. Removing and Installing the System Battery 2 1 3 1 battery socket 3 tab 2 system battery Installing the System Battery 1 Install the new battery with the "+" facing up, and press down until it snaps into place. See Figure 3-26. 2 Close the system. See "Closing the System" on page 47. 3 Reconnect the system to the electrical outlet and turn on the system and attached peripherals. 4 Enter the System Setup program to confirm that the battery operates properly. See "Using the System Setup Program" on page 31. 5 From the main screen, select System Time to enter the correct time and date. 6 Re-enter any system configuration information that is no longer displayed on the System Setup screens, and then exit the System Setup program. 7 To test the newly installed battery, see "Troubleshooting the System Battery" on page 111. 8 After an hour, reconnect the system to a power source and turn it on. 9 Enter the System Setup program. If the time and date are still incorrect, see "Getting Help" on page 137. 90 Installing System Components