Dell PowerEdge T105 Hardware Owner's Manual (PDF) - Page 94
Installing the Chassis Intrusion Switch
View all Dell PowerEdge T105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
4 Slide the chassis intrusion switch out of the securing bracket notch. See Figure 3-28. 5 Remove the switch and its attached cable from the system. Figure 3-28. Removing and Installing the Chassis Intrusion Switch 1 2 3 1 chassis intrusion switch 3 INTRUSION connector 2 securing bracket notch Installing the Chassis Intrusion Switch 1 Align the chassis intrusion switch with the securing bracket notch. See Figure 3-28. 2 Slide the switch into the securing bracket notch. 3 Connect the switch cable to the INTRUSION connector on the system board. 94 Installing System Components
94
Installing System Components
4
Slide the chassis intrusion switch out of the securing bracket notch. See
Figure 3-28.
5
Remove the switch and its attached cable from the system.
Figure 3-28.
Removing and Installing the Chassis Intrusion Switch
Installing the Chassis Intrusion Switch
1
Align the chassis intrusion switch with the securing bracket notch. See
Figure 3-28.
2
Slide the switch into the securing bracket notch.
3
Connect the switch cable to the INTRUSION connector on the system
board.
1
chassis intrusion switch
2
securing bracket notch
3
INTRUSION connector
1
2
3