Dell PowerEdge T105 Hardware Owner's Manual (PDF) - Page 24
Heatsink was not, detected., Insert bootable media, Keyboard Controller, Failure, Keyboard Stuck Key - not booting
View all Dell PowerEdge T105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Table 1-6. System Messages (continued) Message Heatsink was not detected. Insert bootable media Keyboard Controller Failure Keyboard Stuck Key Failure Keyboard failure NIC failure. No boot device available Causes Corrective Actions Heatsink failure. Ensure heatsink and shroud assembly are properly attached. See Figure 3-21. The operating system is Insert a bootable trying to boot from a diskette or CD. nonbootable diskette or CD. A cable or connector might be loose, or the keyboard or keyboard/mouse controller might be faulty. See "Troubleshooting the Keyboard" on page 105. See "Troubleshooting a NIC" on page 108. The system cannot find If the diskette drive is the diskette or hard your boot device, ensure drive. that a bootable disk is in the drive. If the hard drive is your boot device, ensure that the hard drive is installed, the interface cable is properly connected, and the hard drive is partitioned as a boot device. Enter the System Setup program and verify the boot sequence information. See "Using the System Setup Program" on page 31. 24 About Your System