Dell PowerEdge T105 Hardware Owner's Manual (PDF) - Page 99
Replace the large processor cooling fan. See Replacing the Cooling Fans,
View all Dell PowerEdge T105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
2 Secure the I/O panel assembly by replacing the screw. See Figure 3-30. 3 Secure the I/O panel ribbon cable through the clips beneath the 3.5 optional diskette drive and on the side of the power supply shroud, and connect the I/O panel ribbon cable to the new I/O panel connector. See Figure 3-31. Figure 3-31. Cabling the I/O Panel Assembly 4 5 1 3 1 I/O panel connector 3 4-pin power cable to system board 5 I/O panel ribbon cable 2 2 I/O panel assembly 4 cable clip on power supply 4 Replace the large processor cooling fan. See "Replacing the Cooling Fans" on page 86. Installing System Components 99
Installing System Components
99
2
Secure the I/O panel assembly by replacing the screw. See Figure 3-30.
3
Secure the I/O panel ribbon cable through the clips beneath the 3.5
optional diskette drive and on the side of the power supply shroud, and
connect the I/O panel ribbon cable to the new I/O panel connector. See
Figure 3-31.
Figure 3-31.
Cabling the I/O Panel Assembly
4
Replace the large processor cooling fan. See "Replacing the Cooling Fans"
on page 86.
1
I/O panel connector
2
I/O panel assembly
3
4-pin power cable to system board
4
cable clip on power supply
5
I/O panel ribbon cable
4
2
5
1
3