Dell PowerEdge T105 Hardware Owner's Manual (PDF) - Page 29

Table 1-6. System Messages (continued) Message Causes Corrective Actions Warning! A fatal error A multibit ECC error has caused system has occurred. reset! Please check the system event log. Run the system diagnostics. See "Running the System Diagnostics" on page 127. Warning: The installed memory configuration is not optimal. A DIMM configuration Reinstall the memory is unsupported. The modules and, if installed memory necessary, replace them. modules are not See "Troubleshooting matched pairs. System Memory" on page 114. Write fault Write fault on selected drive The operating system cannot write to the diskette drive or hard drive. See "Troubleshooting a Diskette Drive" on page 116 or "Troubleshooting a Hard Drive" on page 120. :\ is not The diskette drive accessible. The device cannot read the is not ready. diskette. Insert a diskette into the drive or replace the existing diskette, and try again. Warning Messages A warning message alerts you to a possible problem and prompts you to respond before the system continues a task. For example, before you format a diskette, a message will warn you that you may lose all data on the diskette. Warning messages usually interrupt the task and require you to respond by typing y (yes) or n (no). NOTE: Warning messages are generated by either the application or the operating system. For more information, see the documentation that accompanied the operating system or application. About Your System 29