Dell S3100 Command Line Reference Guide for the Series 9.100.0 - Page 1223

Version 9.8(0.0P2) 9.7(0.0) 9.5(0.1) 9.4(0.0) Description Introduced on the S3048-ON. Introduced on the S6000-ON. Introduced on the Z9500. Introduced on the S-Series and Z9000. Usage Information If you configure a VRF for an SSH session, then you need not explicitly mention the same VRF for the SSH client sessions intended for that VRF. The vrf attribute in the ip ssh vrf command is applicable for both the SSH client as well as the COPY (SCP) commands. Example Dell(conf)#ip ssh vrf vrf1 Dell(conf)#do ssh 10.10.10.2 -l admin Dell(conf)#no ip ssh vrf vrf1 show crypto Display the public part of the SSH host-keys. Syntax NOTE: Some of the parameters in this command require licensing to access. For more information, contact your Dell Networking representative. Parameters show crypto key mypubkey {rsa | rsa1} Key mypubkey rsa rsa1 Enter the keyword key to display the host public key. Enter the keyword mypubkey to display the host public key. Enter the keyword rsa to display the host SSHv2 RSA public key. Enter the keyword rsa1 to display the host SSHv1 RSA public key. NOTE: If you enable FIPS mode, this parameter is not available. Defaults none Command Modes EXEC Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version Description 9.8(2.0) 9.8(1.0) 9.8(0.0P5) 9.8(0.0P2) 9.7(0.0) 9.2(1.0) 9.0.2.0 8.3.11.1 8.3.7.0 7.6.1.0 7.5.1.0 pre-6.1.1.0 Introduced on the S3100 series. Introduced on the Z9100-ON. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the S6000-ON. Introduced on the Z9500. Introduced on the S6000. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Security 1223