Dell S3100 Command Line Reference Guide for the Series 9.100.0 - Page 376

Example The following describes the show ip bgp community command shown in the following example. Field Description Network Next Hop Metric LocPrf Weight Path Displays the destination network prefix of each BGP route. Displays the next hop address of the BGP router. If 0.0.0.0 is listed in this column, then local routes exist in the routing table. Displays the BGP route's metric, if assigned. Displays the BGP LOCAL_PREF attribute for the route. Displays the route's weight. Lists all the ASs the route passed through to reach the destination network. Dell# show ip bgp community ? local-AS Do not export outside local AS (well-known community) no-advertise Do not advertise to any peer (well-known community) no-export Do not export to next AS (well-known community) aa:nn Community number in aa:nn format | Pipe through a command Dell# show ip bgp community BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0 BGP local router ID is 192.168.11.5 Status codes: s suppressed, S stale, d dampened, h history, * valid, > best Path source: I - internal, a - aggregate, c - confed-external, r - redistributed n - network, D - denied, S - stale Origin codes: i - IGP, e - EGP, ? - incomplete Network *> 55.0.0.0/24 *> 66.0.0.0/24 Next Hop 172.16.0.2 172.16.0.2 Metric LocPrf Weight Path 0 200 i 0 200 i Dell# show ip bgp community no-advertise BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0 BGP local router ID is 192.168.11.5 Status codes: s suppressed, S stale, d dampened, h history, * valid, > best Path source: I - internal, a - aggregate, c - confed-external, r - redistributed n - network, D - denied, S - stale Origin codes: i - IGP, e - EGP, ? - incomplete Network *> 66.0.0.0/24 Dell# Next Hop 172.16.0.2 Metric LocPrf Weight Path 0 200 i show ip bgp community-list View routes that a specific community list affects. Syntax Parameters show ip bgp [vrf vrf-name] [ipv4 {unicast | multicast} | ipv6 unicast] community-list community-list-name [exact-match] vrf vrf-name ipv4 unicast ipv4 multicast ipv6 unicast community-listname exact-match (OPTIONAL) Enter the keywords vrf and then the name of the VRF to view routes affected by a specific community list corresponding to that VRF. (OPTIONAL) Enter the keywords ipv4 unicast to view information only related to ipv4 unicast routes. (OPTIONAL) Enter the keyword ipv4 followed by the keyword multicast to view information related only to ipv4 multicast routes. (OPTIONAL) Enter the keyword ipv6 followed by the keyword unicast to view information related only to ipv6 unicast routes. Enter the name of a configured IP community list (maximum 140 characters). Enter the keyword for an exact match of the communities. Command Modes • EXEC 376 Border Gateway Protocol