Dell S3100 Command Line Reference Guide for the Series 9.100.0 - Page 1237

role Changes command permissions for roles. Syntax role mode { { { addrole | deleterole } role-name } | reset } command To delete access to a command, use the no role mode role-name Parameters mode Enter one of the following keywords as the mode for which you are controlling access: configure for CONFIGURATION mode exec for EXEC mode interface for INTERFACE modes line for LINE mode route-map for Route-map mode router for Router mode addrole deleterole Enter the keyword addrole to add permission to the command. You cannot add or delete rights for the sysadmin role. Enter the keyword deleterole to remove access to the command. You cannot add or delete rights for the sysadmin role. role-name reset command Enter a text string for the name of the user role up to 63 characters. These are 3 system defined roles you can modify: secadmin, netadmin, and netoperator. Enter the keyword reset to reset all roles back to default for that command. Enter the command's keywords to assign the command to a certain access level. You can enter one or more keywords. Defaults none Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version Description 9.8(2.0) 9.8(1.0) 9.8(0.0P5) 9.8(0.0P2) 9.7(0.0) 9.5(0.0) Introduced on the S3100 series. Introduced on the Z9100-ON. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the S6000-ON. Introduced on the Z9000, S6000, S4820T, S4810, and MXL. Related Commands • userrole - creates user roles. show role Display information on permissions assigned to a command, including user role and/or permission level. Syntax Parameters show role mode {mode} {command} command mode mode Enter the command's keywords to assign the command to a certain access level. You can enter one or all of the keywords. Enter keyword then one of the following modes. Security 1237