Epson 755c User's Guide - Page 101

Transferring Your Scenario to a Memory Card Once your scenario is saved, you can transfer it to a memory card or USB storage device. You can use any of the following standard cards. Most require a PC card adapter to allow insertion into the projector (check with your computer dealer to purchase a PC card adapter). ■ CompactFlash™ ■ Memory Stick™ ■ SmartMedia™ ■ MicroDrive™ ■ SD™ (Secure Digital ■ MMC (Multimedia) ■ ATA flash (does not require a PC card adapter) Be sure to use the transfer process described below to ensure that the scenario plays properly: 1. Insert the memory card in your computer's PCMCIA slot or connect the USB storage device. 2. Start EMP SlideMaker 2 (see page 94). 3. Use the navigation tools in the folders window to locate the scenario file you want to review. Click the file, then click File > Open to open the scenario. 4. From the Scenario Option(s) menu, choose Send Scenario. You see a drive selection window: Select your memory card drive note You have to save the scenario on your computer's hard drive before transferring it. Don't use Windows to copy the scenario to your memory card, or it may not play properly. You must insert the memory card in your computer's PCMCIA slot (or connect the USB device) before you select Send Scenario from the Scenario Option(s) menu. If you don't, you won't be able to see the card's drive in the drive selection window. If this happens, close and restart EMP SlideMaker 2. 5. Choose the drive where your card is located and click OK. 6. Click OK again to confirm. Your scenario is transferred to the card. Presenting from a Memory Card, Digital Camera, or External Drive 101