Epson 755c User's Guide - Page 59
Using Access Point Mode, Configuring the Projector
UPC - 010343855366
View all Epson 755c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Using Access Point Mode To use Access Point (infrastructure) mode, first adjust your projector and wireless access point or AirPort base station settings as described in this section. Configuring the Projector 1. Switch the projector to EasyMP and insert the Epson 802.11G/B card (see page 50). You see this screen: 2. To select Config, press the Enter button on the remote control. 3. Highlight Basic under Wireless LAN and press Enter. You see the following screen: Access point mode Presenting Through a Wireless Network 59
Presenting Through a Wireless Network
59
Using Access Point Mode
To use Access Point (infrastructure) mode, first adjust your projector
and wireless access point or AirPort base station settings as described
in this section.
Configuring the Projector
1.
Switch the projector to EasyMP and insert the Epson 802.11G/B
card (see page 50). You see this screen:
2.
To select
Config
, press the
Enter
button on the remote control.
3.
Highlight
Basic
under Wireless LAN and press
Enter
.
You see the following screen:
Access point
mode