Epson 755c User's Guide - Page 147
Hold the lamp as shown and pull it straight out., facing the right way.
UPC - 010343855366
View all Epson 755c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
4. Turn the projector over. Press in on the tabs and lift up the lamp cover. 5. Loosen the two screws holding the lamp in place (you don't need to remove them). Loosen, but don't remove these screws 6. Hold the lamp as shown and pull it straight out. note The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash. 7. Gently insert the new lamp. (If it doesn't fit easily, make sure it is facing the right way.) Maintaining the Projector 147
Maintaining the Projector
147
4.
Turn the projector over. Press in on the tabs and lift up the lamp
cover.
5.
Loosen the two screws holding the lamp in place (you don’t need
to remove them).
6.
Hold the lamp as shown and pull it straight out.
7.
Gently insert the new lamp. (If it doesn’t fit easily, make sure it is
facing the right way.)
Loosen, but don’t
remove these screws
note
The lamp(s) in this
product contain mercury.
Please consult your state and
local regulations regarding
disposal or recycling. Do not
put in the trash.