Epson ActionPrinter 4000 User Manual - Page 155
Selecting a Font, Send a software command, ESC k, to the printer to select
View all Epson ActionPrinter 4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
The Multi-Font Module Selecting a Font This table shows the family numbers and characters per inch of the fonts in the Multi-Font Module. Font name Courier Prestige Script OCR-B OCR-A Orator Orator-S Family number 2 3 4 5 6 7 8 Characters per inch 10, 12, 15 10, 12, 15 10, 12, 15 10 10 10 10 There are two ways to select a font from the module: . With the printer turned off, dial the family number of the font with the rotary switch on the module. When the printer is turned on, that font becomes the default font if the slot is selected with the DIP switch setting or by pressing the button on the control panel. 0 Send a software command, ESC k, to the printer to select the family number. See the Command Summary in Chapter 9 for details. Proportional spacing is not effective when printing any font in this module. Numbers 0, 1, and 9 are not used. Using the Printer Options 5-33