Epson ActionPrinter 4000 User Manual - Page 159
Installing the board, FG wire not attached, Using the Printer Options
View all Epson ActionPrinter 4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
The Interface Boards Installing the board There are two basic interface board designs-one with the FG wire not attached and one with the FG wire attached. This slight difference changes the way the boards are installed in the printer but does not affect the operation of the interface in any way. Check to see which type of interface board you have. FG wire not attached See below FG wire attached Skip to page 5-39 FG wire not attached 1. Use the CG screw to attach the round end of the FG (frame ground) wire to the main board and position the other end as shown. Using the Printer Options 5-37
The Interface Boards
Installing the board
There are two basic interface board designs-one with the FG wire
not attached and one with the FG wire attached. This slight
difference changes the way the boards are installed in the printer
but does not affect the operation of the interface in any way. Check
to see which type of interface board you have.
FG wire not attached
FG wire attached
See below
Skip to page 5-39
FG wire not attached
1.
Use the CG screw to attach the round end of the FG (frame
ground) wire to the main board and position the other end as
shown.
Using the Printer Options
5-37