Epson ActionPrinter 4000 User Manual - Page 161
FG wire attached, Using the Printer Options, round end of the FG
View all Epson ActionPrinter 4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
The Interface Boards FG wire attached 1. Carefully place the interface board next to the printer as shown below. Use the CG screw to connect the round end of the FG (frame ground) wire to the main board. 2. Holding the interface board level, rotate it into position and attach it to the main board. Make sure that the connector pins are properly inserted into the mating connector. Using the Printer Options 5-39
The
Interface
Boards
FG wire attached
1.
Carefully place the interface board next
below. Use the CG screw to connect the
(frame ground) wire to the main board.
to the printer as shown
round end of the FG
2.
Holding the interface board level, rotate it into position and
attach it to the main board. Make sure that the connector pins
are properly inserted into the mating connector.
Using the Printer Options
5-39