Epson ActionPrinter 4000 User Manual - Page 31
On Line, Load/eject
View all Epson ActionPrinter 4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Testing the Printer 8. If the test results are satisfactory and you wish to stop the test, press the ON LINE button. If the test results are not satisfactory, see Checking the Operation later in this chapter for possible causes and solutions. Note: To resume the test, press the ON LINE button once more. 9. If the paper is still loaded, press the LOAD/EJECT button or LINE FEED button to eject it. Then turn off the printer. WARNING: After turning the power off, always wait at least five seconds before turning it back on. Turning the power on and off rapidly can damage the printer. 1-18 Setting Up the Printer
Testing the Printer
8.
If the test results are satisfactory and you wish to stop the test,
press the
ON LINE
button. If the test results are not satisfactory,
see Checking the Operation later in this chapter for possible
causes and solutions.
Note:
To resume the test, press the
ON LINE
button once more.
9.
If the paper is still loaded, press the
LOAD/EJECT
button or
LINE
FEED
button to eject it. Then turn off the printer.
WARNING:
After turning the power off, always wait at
least five seconds before turning it back on. Turning the
power on and off rapidly can damage the printer.
1-18
Setting Up the Printer