Epson ActionPrinter 4000 User Manual - Page 201
again. See Options, The paper, crooked., You tried to manually, insert a single sheet
View all Epson ActionPrinter 4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 201 highlights
Problem Using the cut sheet feeder, the paper does not feed properly (continued). The paper feed is crooked. You tried to manually insert a single sheet, but instead paper was fed from the cut sheet feeder's bin. Solution Options The paper may be old or creased. Discard it and load new, clean sheets of paper. The left and right paper guides may be too far apart. Adjust the paper guides to the width of the paper. There may be too much outgoing paper. Never let more than 80 sheets of outgoing paper accumulate while printing. The weight of your paper may be too heavy or too light for the cut sheet feeder. Refer to the specifications in Chapter 8 and make sure that your paper is the proper size and quality. The single sheet may have been inserted in the wrong place. Check it and try again. See Chapter 5. Paper may feed from the bin if you try to insert several single sheets. To insert several single sheets, pull the paper set lever forward. Troubleshooting 7-27