Epson ActionPrinter 4000 User Manual - Page 79

Using Short Tear-Off When you are finished printing, the short tear-off feature automatically feeds the perforation of the continuous paper to the tear-off edge of the printer cover so that you can tear off the last sheet. When you resume printing, the paper feeds backward to the loading position. This feature lets you save the paper normally lost between documents. To use this feature, set DIP switch 2-2 to on. Then load continuous paper in the normal way. You can leave the short tear-off feature turned on (DIP switch 2-2 on) even when you are using single sheets. When you move the paper release lever to the single-sheet position, the short tear-off feature is disabled. WARNING: Never use short tear-off with labels. Otherwise, labels may come off their backing and jam the printer. When you have finished printing, and if the perforation is at the top of form position, the printer automatically feeds the perforation of the continuous paper to the tear-off edge of the printer cover. You can then tear off the page using the tear-off edge as shown on the next page. 3-14 Using the Printer