Epson LQ-300 User Manual - Page 36

Using the Control Panel, Lights and Buttons, Pa use, Font 1, Font 2 lights

Page 36 highlights

Using the Control Panel You can control simple printer operationssuch as line feeding, form feeding, loading and ejecting paper, and selecting fontswith the buttons on the control panel. The control panel lights show the printer's status and the current font. Lights and buttons Pa use light The orange Pause light is on when the printer stops printing. Each time you turn on the printer, the light flashes briefly. When the printer is out of paper, the light flashes and the beeper sounds three times. The light also flashes when you can tear off the last sheet of continuous paper at the edge of the printer cover. The Pause light goes on and the beeper sounds if an error occurs. Font 1 and Font 2 lights The green Font lights, 1 and 2, indicate the current font setting. For more about selecting fonts, see page 2-4. While in the micro adjust mode, the Font lights flash. See "Adjusting the loading position" on page 2-5. 2-2 Using the Printer

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117

Using the Control Panel
You can control simple printer operationssuch as line
feeding, form feeding, loading and ejecting paper, and selecting
fontswith the buttons on the control panel. The control panel
lights show the printer’s status and the current font.
Lights
and
buttons
Pa use
light
The orange
Pause
light is on when the printer stops printing.
Each time you turn on the printer, the light flashes briefly.
When the printer is out of paper, the light flashes and the
beeper sounds three times. The light also flashes when you can
tear off
the
last sheet of continuous paper at the edge of the
printer cover.
The
Pause
light goes on and the beeper sounds if an error
occurs.
Font 1
and
Font 2 lights
The green
Font
lights, 1 and 2, indicate the current font setting.
For more about selecting fonts, see page 2-4.
While in the micro adjust mode, the
Font
lights flash. See
“Adjusting the loading position” on page 2-5.
2-2
Using the Printer