Epson LQ-300 User Manual - Page 52
When you choose lever positions 2-6, the, print speed is reduced.
View all Epson LQ-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
1. Turn the printer off and open the cover. The paper-thickness lever is on the left side of the printer. The numbers next to the lever indicate the thickness setting. For normal use, the lever should always be set to position 0. 2. Use the table below to select the appropriate paper thickness. Paper type (Reserved) Standard paper (single sheets or continuous) Multi-part forms 2-sheet 3-sheet 4-sheet Envelopes 20 lb 24 lb (Reserved) Lever position I -1 0 1 2 3 4 5 6 3. Close the cover. When you finish printing, move the paper-thickness lever back to position 0. Note: When you choose lever positions 2-6, the print speed is reduced. 2-18 Using the Printer
1.
Turn the printer off and open the cover. The paper-thickness
lever is on the left side of the printer. The numbers next to
the lever indicate the thickness setting. For normal use, the
lever should always be set to position 0.
2.
Use the table below to select the appropriate paper thickness.
Paper type
Lever position
(Reserved)
I
-1
Standard paper (single sheets or continuous)
0
Multi-part forms
2-sheet
1
3-sheet
2
4-sheet
3
3.
Envelopes
20 lb
4
24 lb
5
(Reserved)
6
Close the cover. When you finish printing, move the
paper-thickness lever back to position 0.
Note:
When you choose lever positions 2-6, the
print speed is reduced.
2-18
Using the Printer