Epson LQ-300 User Manual - Page 63
Installing and Using Options, Single-bin Cut-Sheet feeder
View all Epson LQ-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Installing and Using Options Single-bin Cut-Sheet feeder The optional Single-bin Cut-Sheet Feeder (C80637*) handles up to 50 sheets of standard bond paper ( 82 g/m2 or 22 lb) without reloading. Follow these steps to install the cut-sheet feeder: 1. Make sure the printer is turned off. Remove the paper guide. 2. If the tractor is installed in the pull-tractor position, remove it and reinstall it in the push-tractor position. 3. Make sure the paper-release lever is in the single-sheet position. 4. Hold the cut-sheet feeder in both hands and press on the latch levers. Fit the notches in the cut-sheet feeder over the mounting posts on the printer. Releasing the latch levers locks the cut-sheet feeder in place. Using the Printer 2-29
Installing and Using Options
Single-bin Cut-Sheet feeder
The optional Single-bin Cut-Sheet Feeder (C80637*) handles
up to 50 sheets of standard bond paper ( 82 g/m
2
or 22 lb)
without reloading. Follow these steps to install the cut-sheet
feeder:
1.
2.
3.
4.
Make sure the printer is turned off. Remove the paper guide.
If the tractor is installed in the pull-tractor position, remove
it and reinstall it in the push-tractor position.
Make sure the paper-release lever is in the single-sheet
position.
Hold the cut-sheet feeder in both hands and press on the
latch levers. Fit the notches in the cut-sheet feeder over the
mounting posts on the printer. Releasing the latch levers
locks the cut-sheet feeder in place.
Using the Printer
2-29