Epson LQ-300 User Manual - Page 68

tractors, turn the knob on the right side of the pull tractor

Get Epson LQ-300 - Impact Printer PDF manuals and user guides View all Epson LQ-300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 68 highlights

4. Release the sprocket lock levers of the pull tractor and adjust the sprocket units to match the width of the paper. Be sure that the sprocket units on both the tractors are aligned so that the paper is not crooked. 5. Open the sprocket covers. Fit the holes of the paper over the tractor pins of the sprocket units and adjust the sprocket units as necessary. (See "Printing on Continuous Paper" on page 2-7.) Close the sprocket covers. 6. If there is slack in the paper between the push and pull tractors, turn the knob on the right side of the pull tractor to remove the slack. 7. See that the paper is not crooked or wrinkled and lock the sprocket units in place. 8. Reinstall the printer cover and the paper guide. 2-34 Using the Printer

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
4.
Release the sprocket lock levers of the pull tractor and adjust
the sprocket units to match the width of the paper. Be sure
that the sprocket units on both the tractors are aligned so
that the paper is not crooked.
5.
Open the sprocket covers. Fit the holes of the paper over the
tractor pins of the sprocket units and adjust the sprocket
units as necessary. (See “Printing on Continuous Paper” on
page 2-7.) Close the sprocket covers.
6.
If there is slack in the paper between the push and pull
tractors, turn the knob on the right side of the pull tractor to
remove the slack.
7.
See that the paper is not crooked or wrinkled and lock the
sprocket units in place.
8.
Reinstall the printer cover and the paper guide.
2-34
Using the Printer