Epson LQ-300 User Manual - Page 81
Options, When You Use Cut-sheet Feeder, the Not Feed Properly, cut-sheet feeder,
View all Epson LQ-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
The paper does not eject properly. When using the pull tractor, tear off the paper entering the printer, then press the LF/FF button to feed the paper forward. When using the push tractor, tear off the paper at the last printed page, then press the Font and LF/FF buttons together to feed the paper backward. When you switch between single sheets and continuous paper, the beeper sounds once and the Pause light comes on. You may have tried to change the paper-release lever position while paper remained in the printer. Return the paper-release lever to the previous position and eject the paper. Then change the paper-release lever position. Options When you use the cut-sheet feeder, the paper does not feed properly The paper does not feed. The cut-sheet feeder may be incorrectly installed. Reinstall it as described on page 2-29. Make sure the paper-release lever is pushed back to the single-sheet position. You may have loaded too many sheets in the cut-sheet feeder's bin. Make sure the bin contains no more than 50 sheets. Troubleshooting 3-9