Epson PowerLite 9000NL User Manual - Page 98
Video Menu (Image Source = Computer), Computer 1 or Computer 2.
View all Epson PowerLite 9000NL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
The settings available in each of the menus are described below. Note: Some options are limited to being enabled (turned on) or disabled (turned off). Enabled options are indicated by a green light. Disabled options are blank. Video Menu (Image Source = Computer) The Video menu lets you make adjustments to the projected image. The following options are available when the image source is Computer 1 or Computer 2. Note: The computer must be connected and operating, and the image source on the projector must be set to Computer 1 or Computer 2 for you to access these menu options. Menu item Description Position Select this item and then press the right arrow button (control panel) or press right on the Enter button (remote control) to enter the screen position adjustment mode. Then use the Enter button (remote control) or up, down, left, and right buttons (control panel) to move the screen position in the corresponding direction. When you finish making adjustments, press the Esc button to return to the Video menu. Tracking Matches the projector's internal clock to various computer graphic signals. Adjust this setting to remove vertical lines from the image. Sync Synchronizes with the tracking signal sent from the computer. Adjust this setting to correct fuzziness or screen flicker. 88 3 • Using the Projector Menus