HP 2100 Service Manual - Page 224

Tray 1 Paper Sensor Lever Removal 1 Remove the following assemblies: • Remove the toner cartridge. (See "Toner Cartridge Removal" (page 156) for instructions. • Remove the DIMM cover. (See "DIMM Cover Removal" (page 172) for instructions.) • Remove the rear cover. (See "Rear Cover Removal" (page 177) for instructions.) • Remove the top cover. (See "Top Cover Removal" (page 189) for instructions.) • Remove the left cover. (See "Left Cover Removal" (page 229) for instructions.) • Remove Tray 1. (See "Tray 1 Removal" (page 234) for instructions.) • Remove the formatter PCB. (See "Formatter PCB Removal" (page 174) for instructions.) • Remove the printer drive assembly. (See "Printer Drive Assembly Removal" (page 204) for instructions.) 2 Rotate the paper sensor lever forward until it stops, and then hold it in this position. 3 Grasp the wire connector shown in figure 7-85, and then pivot it toward the printer to remove it. Figure 7-85Removing the Optic Sensor 4 Pull the center of the paper sensor lever outward (see figure 7-86), and then slide it to 214 7 Removal and Replacement C4170-90959