HP 2100 Service Manual - Page 56

Printing Self-Test/Configuration Page The configuration page lists many of the current settings and properties of the printer. To print the configuration page, press and release the GO and JOB CANCEL buttons simultaneously when the printer is ready. If an EIO card is installed, a JetDirect Configuration Page also prints (see figure 3-4). Configuration Page Elements Figure 3-3 HP LaserJet 2100 Self-Test/Configuration Page 1 Printer Information lists the name, formatter number, serial number, firmware datecode, page count, LocalTalk information (name, node ID, and network number), PostScript Level 2 emulation wait timeout, and HP JetSend address. 2 Installed Personalities and Options lists the installed printer languages (PCL, PCLXL, and PostScript Level 2 emulation) and the options installed in each of the three DIMM slots and the EIO slot. 3 Memory lists total memory, available memory, I/O buffering information, and resource saving information. 4 Status Log lists the PJL status code and the corresponding page count. (The status log only appears when errors have been registered.) 5 Settings lists settings for copies, paper, wide A4, courier, orientation, form, manual feed, Resolution Enhancement technology (REt), resolution, personality, I/O timeout, reprint, font (source, number, pitch, symbol set, and line term), PostScript Level 2 emulation error reporting, tray (multipurpose tray designation, tray locking, auto continue, density, and tray mode), and I/O buffer. 46 3 Printer Configuration C4170-90959