HP 2100 Service Manual - Page 41

NOTE: NOTE: Tray 1 Media Sizes Tray 1 adjusts for sizes from 76 by 127 mm (3 by 5 inches) to 216 by 356 mm (8.5 by 14 inches). Tray 1 should be used when printing the following: • Envelopes • Labels • Transparencies • Custom-sized media or cardstock • Postcards Table 2-2. Tray 1 Media Sizes Tray 1 Minimum Size (custom) Maximum Size (custom) Transparency Labels Envelopes Dimensions Weight Capacity 76 by 127 mm (3 by 5 60 to 163 g/m2 (16 to in.) 43 lb Bond) 216 by 356 mm (8.5 by 14 in.) 100 sheets of 80 g/m2 (20 lb Bond) paper Same as minimum and Thickness: 75 typical maximum paper sizes .10 to .14 mm (0.0039 listed above. to 0.0055 in.) Thickness: 50 typical .10 to .14 mm (0.0039 to 0.0055 in.) Up to 90 g/m2 (16-24 lb) up to 10 The printer supports a wide range of media sizes. Check the printer software for supported sizes. Capacity may vary depending on media weight and thickness, and environmental conditions. Smoothness should be between 100 to 250 (Sheffield). For information about measuring basis weight, see "Basis Weight Field Test" (page 38). For information about measuring caliper, see "Caliper Field Test" (page 39). For information about smoothness, see "Paper Finish Field Test" (page 40) Users may experience some paper jams when using any media with a length less than 178 millimeters (7 inches.). This may be caused by paper that has been affected by environmental conditions. For optimum performance, make sure that users are storing and handling the paper correctly. C4170-90959 Media Specifications 31