HP 4700n HP Color LaserJet 4700 - User Guide - Page 205
Xy.zz Check Ram, Dimm Slot X - fuser error
UPC - 829160845630
View all HP 4700n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 205 highlights
Control panel message 50.X FUSER ERROR To continue turn off then on 51.2Y PRINTER ERROR For help press alternates with 51.2Y PRINTER ERROR To continue turn off then on 52.XY PRINTER ERROR alternates with To continue turn off then on 53.XY.ZZ CHECK RAM DIMM SLOT X 54.01 PRINTER ERROR To continue turn off then on 54.X PRINTER ERROR To continue turn off then on ENWW Description Recommended action The error might be due to an inadequate power supply, inadequate line voltage, or a problem with the fuser. A fuser error has occurred. Turn the printer off then on. Either a laser beam detects an error, or a laser error has occured. The values of Y are: Y Description 0 - Black 1 - Cyan 2 - Magenta 3 - Yellow 1. Turn the printer off then on. 2. If the problem persists, contact HP Support at http://www.hp.com/ support/clj4700. A printer error has occurred. Turn the printer off then on. Press for more information. If the message persists, contact HP Support at http://www.hp.com/support/clj4700. A memory error has occurred. Printing cannot continue. The humidity environmental sensor is abnormal. If prompted to do so, press to continue. The printer should come to the Ready state, but will not make full use of all memory installed. Otherwise: 1. Turn the printer off. 2. Verify that all DDR SDRAM meets specifications and is correctly seated. 3. Turn the printer on. 4. If the problem persists, contact HP Support at http://www.hp.com/ support/clj4700. 1. Turn the printer off then on. 2. If the problem persists, contact HP Support at http://www.hp.com/ support/clj4700. Printing cannot continue. There is a sensor malfunction. Values of X are: 01 - Humidity sensor 1. Turn the printer off then on. 2. If the problem persists, contact HP Support at http://www.hp.com/ support/clj4700. Control panel messages 189