HP 4700n HP Color LaserJet 4700 - User Guide - Page 76
I/O menu, This menu allows you to con the printer's I/O options., Control panel
UPC - 829160845630
View all HP 4700n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Menu item STAPLES OUT OFFSET Values CONTINUE STOP ENABLED DISABLED Description The STAPLES OUT menu defines the action that the stapler/stacker takes when it runs out of staples. It can instruct the printer to stop and wait until the stapler cartridge is replaced, or it can allow printing to continue without stapling. If the device is configured to stop when the cartridge is empty, up to two jobs might be processed without stapling before the printer stops. The default is CONTINUE. The OFFSET menu stipulates whether the job should be offset. When this configuration is set at the control panel, it is applied to all subsequent jobs. It cannot be applied on a job-by-job basis. The default is ENABLED. Only supported paper sizes can be offset. I/O menu This menu allows you to configure the printer's I/O options. See Network configuration. Menu item I/O TIMEOUT PARALLEL INPUT Values 15 SECONDS Range:5 - 300 HIGH SPEED ADVANCED FUNCTIONS EMBEDDED JETDIRECT MENU The values may vary. Possible values may include: TCP/IP IPX/SPX APPLETALK DLC/LLC SECURE WEB DIAGNOSTICS RESET SECURITY LINK SPEED Description Allows you to set the printer I/O timeout in seconds. Allows you to select the speed at which the parallel port communicates with the host and to enable or disable the bi-directional parallel communication. The default for HIGH SPEED is YES. The default for ADVANCED FUNCTIONS is ON. TCP/IP: Select whether the TCP/IP protocol stack is enabled or disabled. You can set several parameters. Select the TCP/IP CONFIGURE METHOD to configure the EIO card. For the MANUAL option, select the values for IP ADDRESS, SUBNET MASK, LOCAL GATEWAY, and DEFAULT GATEWAY. IPX/SPX: Select whether the IPX/SPX protocol stack (in Novell NetWare networks, for example) is enabled or disabled. APPLETALK: Enable or disable an AppleTalk network. 60 Chapter 2 Control panel ENWW