HP 4700n HP Color LaserJet 4700 - User Guide - Page 213
To Load Fonts/data, Internal Disk Not Functional
UPC - 829160845630
View all HP 4700n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 213 highlights
Control panel message INSTALL FUSER INSTALL SUPPLIES For status press The supplies gauge will display the consumption levels of print cartridges. INSTALL TRANSFER UNIT INSUFFICIENT MEMORY TO LOAD FONTS/DATA For help press alternates with Device To continue press Internal disk initializing INTERNAL DISK NOT FUNCTIONAL Internal disk spinning up LOAD TRAY 1: For help press LOAD TRAY 1: Description Recommended action The fuser is not installed or is not installed correctly. Confirm that the fuser is installed in the printer and is fully seated. Press to see step by step information. At least one supply item is missing or is not 1. correctly seated in the printer and another supply item is missing, incorrectly placed, out, or low. Insert the supply item or make 2. sure the installed supply item is fully seated. Press to access the SUPPLIES STATUS menu. Press and to highlight the specific supply that has a problem. 3. Press to view help for the supply. 4. Press and to step through the instructions. The transfer unit is not installed or is not installed correctly. 1. Press to access the SUPPLIES STATUS menu. 2. Press to highlight the transfer unit. 3. Press to view help. 4. Press and to step through the instructions. The device does not have enough memory to 1. load the data, such as fonts or macros from the location specified. Device can be one of the following: 2. INTERNAL = ROM directly on the formatter board To use the device without the data, press . To solve the problem, add more memory to the device. DDR SDRAM Memory: 128MB, (Q2630A) or 256MB (Q2631A). CARD SLOT X = font card in slot X DIMMS EIO X DISK = removable hard disk installed in EIO slot X The internal disk device is initializing. No action necessary. The internal disk is not working correctly. Turn the printer off then on. If the error persists, contact HP Support at http://www.hp.com/support/clj4700. The internal disk is spinning up. This message generally appears for approximately 15 seconds when the printer emerges from sleep mode. Jobs can still print, but jobs that require disk access, such as stored jobs, must wait until the disk is initialized. No action necessary. This message appears when Tray 1 is selected but is not loaded, and no other paper trays are available for use. Load the correct paper in Tray 1 and press to continue. If prompted, confirm the size and type of paper loaded. Tray 1 is loaded and configured for a type and 1. size other than the one specified in the job. 2. If the correct paper is loaded, press . Otherwise, remove the incorrect paper and load Tray 1 with the specified paper. ENWW Control panel messages 197