HP 4700n HP Color LaserJet 4700 - User Guide - Page 71

Menu item AUTO SENSE MODE PRINT MODES OPTIMIZE ENWW Values SOURCE ADJUST TRAY [N] TRAY 1 SENSING TRAY 2-N SENSING A list of available modes appears. A list of available parameters appears. BELT CONTACT CACO3 PAPER TALC PAPER BACKGROUND 1 BACKGROUND 2 TRANSPARENCY MEDIA TYPE REGISTRATION LONG PAPER Description that is printed on the front with the image that is printed on the back. PRINT TEST PAGE: Prints a test page that shows the current registration settings. SOURCE: Allows you to select the tray for which you want to print the test page. If installed, optional trays appear as selections, where [N] is the number of the tray. ADJUST TRAY [N]: Sets the registration fro the specified tray, where [N] is the number of the tray. A selection appears for each tray that is installed, and registration must be set for each tray. ● X1 SHIFT: Registration of the image on the paper from side to side, as the paper lies in the tray. For duplexing, this side is the second side (back) of the paper. ● X2 SHIFT: Registration of the image on the paper from side to side, as the paper lies in the tray, for the first side (front) of a duplexed page. This item appears only if a duplexer is installed and enabled. Set the X1 SHIFT first. ● Y SHIFT: Registration of the image on the paper from top to bottom, as the paper lies in the tray. Allows you to set trays to automatically sense the type of paper loaded. For more information, see the section entitled Automatic media type sensing (auto sense mode). Allows you to associate each media type with a specific print mode. Allows you to optimize certain parameters for all jobs rather than optimizing by media type. Configure device menu 55