HP DL120 ProLiant DL120 Generation 5 Server Maintenance and Service Guide - Page 32

System covers, Primary access panel

Get HP DL120 - ProLiant - G5 PDF manuals and user guides
UPC - 884962061909
View all HP DL120 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

System covers Primary access panel The main chassis area is protected by the primary access panel. This panel must be removed to access the internal components and the system board cable connections of the system drives. To remove the primary access panel: 1. Perform steps 1 through 4 of the pre-installation procedure. 2. Remove the primary access panel. a. Loosen the primary access panel thumbscrew (1). b. Press the panel's release indentations (2) and push backward to release the panel from the chassis (3). c. Remove the primary access panel from the chassis (4). 3. Place the primary access panel in a safe place for reinstallation later. Removal and replacement procedures 32

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
Removal and replacement procedures
32
System covers
Primary access panel
The main chassis area is protected by the primary access panel. This panel must be removed to
access the internal components and the system board cable connections of the system drives.
To remove the primary access panel:
1.
Perform steps 1 through 4 of the pre-installation procedure.
2.
Remove the primary access panel.
a.
Loosen the primary access panel thumbscrew (
1
).
b.
Press the panel’s release indentations (
2
) and push backward to release the panel from the
chassis (
3
).
c.
Remove the primary access panel from the chassis (
4
).
3.
Place the primary access panel in a safe place for reinstallation later.