HP DL120 ProLiant DL120 Generation 5 Server Maintenance and Service Guide - Page 64
PCI-X riser board, To install the PCI-X riser board
![]() |
UPC - 884962061909
View all HP DL120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
PCI-X riser board You can replace the full-length/full-height PCI Express x8 riser board with an optional 133 MHz/3.3V PCI-X model. This will allow installation of PCI-X compatible expansion boards. NOTE: For ease of reading, the PCI riser board assembly will simply be referred to as "assembly" in this section. To install the PCI-X riser board: 1. Remove the PCI riser board assembly. 2. If an expansion board is currently installed on the full-length/full-height PCI Express x8 riser board, remove it. 3. Remove the full-length/full-height PCI Express x8 riser board. a. Remove the two screws that secure the riser board (1). Reuse these screws when you install the PCI-X riser board. b. Detach the riser board from the assembly (2). 4. Remove the PCI-X riser board from its protective packaging. Removal and replacement procedures 64
![](/manual_guide/products/hewlettpackard-dl120-proliant-dl120-generation-5-server-maintenance-service-guide-27dbcac/64.png)