HP DL120 ProLiant DL120 Generation 5 Server Maintenance and Service Guide - Page 42
Optical disc drive, Guidelines for installing an optical disc drive
UPC - 884962061909
View all HP DL120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Optical disc drive The server has a default slim-type 12.7 mm SATA optical disc drive. You can choose to replace this default ODD with another model. The following SATA ODD models are supported: • DVD drive • DVD-RW drive Guidelines for installing an optical disc drive • Install only ODD models specified for your ProLiant server. Installing unsupported ODDs may damage the system by consuming power and generating heat in excess of the server's operating tolerance. This condition may result in a loss of system and/or data integrity. • The ODD carrier has one pre-installed ODD mounting screw located beneath it. • If you removed the default ODD without plans of replacing it, you must perform the following procedure to maintain proper system cooling: a. Reinstall the mounting screws you removed from the ODD module to the ODD carrier. b. Reinstall the carrier in the chassis. c. Cover the ODD bay with the ODD bay bezel (purchased separately). • You will need a flat-blade M2.5 screwdriver to remove the default ODD module from its carrier. Removal and replacement procedures 42