HP DL120 ProLiant DL120 Generation 5 Server Maintenance and Service Guide - Page 48
observing a diagonally opposite pattern, and then loosen them completely to release the heat
![]() |
UPC - 884962061909
View all HP DL120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
4. Remove the heat sink. a. Use the system screwdriver to loosen the four spring-loaded screws a few threads out, observing a diagonally opposite pattern, and then loosen them completely to release the heat sink from the processor base (1). b. Rotate the heat sink a few degrees clockwise and counterclockwise to break the thermal compound bond loose (2). Removal and replacement procedures 48
![](/manual_guide/products/hewlettpackard-dl120-proliant-dl120-generation-5-server-maintenance-service-guide-27dbcac/48.png)
Removal and replacement procedures
48
4.
Remove the heat sink.
a.
Use the system screwdriver to loosen the four spring-loaded screws a few threads out,
observing a diagonally opposite pattern, and then loosen them completely to release the heat
sink from the processor base (
1
).
b.
Rotate the heat sink a few degrees clockwise and counterclockwise to break the thermal
compound bond loose (
2
).