HP DL120 ProLiant DL120 Generation 5 Server Maintenance and Service Guide - Page 84
Loading system defaults, Clearing CMOS
![]() |
UPC - 884962061909
View all HP DL120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Loading system defaults If your system fails after you make changes in the Setup menus, reboot the server, enter Setup and load the system default settings to correct the error. These default settings have been selected to optimize your server's performance. To load the system defaults: 1. Reboot the server in a normal manner. 2. During POST, press F10 to access the Setup Utility. 3. Press F9 to load the default values. 4. Press F10 to save the changes you made and close the Setup Utility. Clearing CMOS You may need to clear the Setup configuration values (CMOS) if the configuration has been corrupted, or if incorrect settings made in the Setup Utility caused error messages to be unreadable. Clearing the CMOS data removes the supervisor password. Use the JP7 jumper to clear the CMOS data. • 1 - 2 position: Normal operation (default) • 2 - 3 position: Clear CMOS data Diagnostic tools 84
![](/manual_guide/products/hewlettpackard-dl120-proliant-dl120-generation-5-server-maintenance-service-guide-27dbcac/84.png)