HP DL120 ProLiant DL120 Generation 5 Server Maintenance and Service Guide - Page 66

To install the Lights Out 100c remote management card, Remove the remote management port cover

Page 66 highlights

To install the Lights Out 100c remote management card: 1. Perform the pre-installation procedure. 2. Locate the Lights-Out 100c module connector on the system board. 3. Remove the Lights-Out 100c blank bracket. a. Remove the remote management port cover (1). b. Position the module between the USB and video ports (2). c. Attach the module to the CN6 connector (3). d. Secure the module with the two screws that came with the module option kit (4). 4. Perform the post-installation procedure. Removal and replacement procedures 66

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108

Removal and replacement procedures
66
To install the Lights Out 100c remote management card:
1.
Perform the pre-installation procedure.
2.
Locate the Lights-Out 100c module connector on the system board.
3.
Remove the Lights-Out 100c blank bracket.
a.
Remove the remote management port cover (
1
).
b.
Position the module between the USB and video ports (
2
).
c.
Attach the module to the CN6 connector (
3
).
d.
Secure the module with the two screws that came with the module option kit (
4
).
4.
Perform the post-installation procedure.