HP DL120 ProLiant DL120 Generation 5 Server Maintenance and Service Guide - Page 60
To replace the system battery
UPC - 884962061909
View all HP DL120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
To replace the system battery: 1. Perform the pre-installation procedure. 2. If necessary, remove any accessory boards or cables that prevent access to the battery socket. 3. Locate the system battery. 4. Replace the system battery. a. Squeeze the metal clamp that extends above one edge of the battery until the battery pops up (1). b. Lift up the old battery to remove it (2). c. Slide one edge of the replacement battery under the holder's lip-positive side facing up- and then push the other edge down until the clamp snaps over the battery. 5. Perform the post-installation procedure. Removal and replacement procedures 60
Removal and replacement procedures
60
To replace the system battery:
1.
Perform the pre-installation procedure.
2.
If necessary, remove any accessory boards or cables that prevent access to the battery socket.
3.
Locate the system battery.
4.
Replace the system battery.
a.
Squeeze the metal clamp that extends above one edge of the battery until the battery pops
up (
1
).
b.
Lift up the old battery to remove it (
2
).
c.
Slide one edge of the replacement battery under the holder’s lip—positive side facing up—
and then push the other edge down until the clamp snaps over the battery.
5.
Perform the post-installation procedure.