HP DL120 ProLiant DL120 Generation 5 Server Maintenance and Service Guide - Page 72
Connect the ATX power cables to their system board connectors
UPC - 884962061909
View all HP DL120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
5. Connect the PSU cables. IMPORTANT: Check the PSU cable label before connecting them. Go to page 36 for a reference figure on proper PSU cable connections. a. Secure the ATX power cables to the chassis cable tie (1). b. Connect the ATX power cables to their system board connectors (2). c. Route the system drive power cables through the center wall, and then secure them to the chassis cable tie (3). d. Connect the power cables of all installed system drives (4). 6. Perform the post-installation procedure. Removal and replacement procedures 72
Removal and replacement procedures
72
5.
Connect the PSU cables.
IMPORTANT:
Check the PSU cable label before connecting them. Go to page 36 for a
reference figure on proper PSU cable connections.
a.
Secure the ATX power cables to the chassis cable tie (
1
).
b.
Connect the ATX power cables to their system board connectors (
2
).
c.
Route the system drive power cables through the center wall, and then secure them to the
chassis cable tie (
3
).
d.
Connect the power cables of all installed system drives (
4
).
6.
Perform the post-installation procedure.