HP DL120 ProLiant DL120 Generation 5 Server Maintenance and Service Guide - Page 56
To remove the PCI riser board assembly, Lift the assembly away from the chassis
![]() |
UPC - 884962061909
View all HP DL120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
To remove the PCI riser board assembly: 1. Perform the pre-installation procedure. 2. Disconnect all cables connected to an existing expansion board. 3. Remove the PCI riser board assembly. a. Loosen the two captive thumbscrews that secure the assembly to the chassis (1). b. Lift the assembly away from the chassis (2). To reinstall the PCI riser board assembly: 1. Align the assembly with the system board expansion slots, and then press it down to ensure full connection to the system board. 2. Tighten the two captive thumbscrews to secure the assembly to the chassis. Removal and replacement procedures 56
![](/manual_guide/products/hewlettpackard-dl120-proliant-dl120-generation-5-server-maintenance-service-guide-27dbcac/56.png)
Removal and replacement procedures
56
To remove the PCI riser board assembly:
1.
Perform the pre-installation procedure.
2.
Disconnect all cables connected to an existing expansion board.
3.
Remove the PCI riser board assembly.
a.
Loosen the two captive thumbscrews that secure the assembly to the chassis (
1
).
b.
Lift the assembly away from the chassis (
2
).
To reinstall the PCI riser board assembly:
1.
Align the assembly with the system board expansion slots, and then press it down to ensure full
connection to the system board.
2.
Tighten the two captive thumbscrews to secure the assembly to the chassis.