HP DL120 ProLiant DL120 Generation 5 Server Maintenance and Service Guide - Page 75
To run the Setup Utility, During POST, press
UPC - 884962061909
View all HP DL120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
The Setup Utility loads the configuration values in a battery-backed nonvolatile memory called CMOS RAM. This memory area is not part of the system RAM, which allows configuration data to be retained when power is turned off. The values take effect when the system is booted. POST uses these values to configure the hardware. If the values and the actual hardware do not agree, POST generates an error message. You must run this utility to change the BIOS settings from the default or current configuration. The Setup Utility has five primary menu selections, including: • Main • Boot • Advanced • Exit • Security To run the Setup Utility: 1. Turn on the monitor and the server. If the server is already turned on, save your data and exit all open applications, and then restart the server. 2. During POST, press F10. If you fail to press F10 before POST is completed, you will need to restart the server. The first page to be displayed will be the Main menu showing the Setup Utility's menu bar. Use the left (Å) and right (Æ) arrow keys to move between selections on the menu bar. Diagnostic tools 75