HP DL120 ProLiant DL120 Generation 5 Server Maintenance and Service Guide - Page 33
Secondary access panel, To remove the secondary access panel
![]() |
UPC - 884962061909
View all HP DL120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Secondary access panel The signal and power cable connections of the system drives are shielded by the secondary access panel. This panel must be removed when configuring the system drives. To remove the secondary access panel: 1. Remove the primary access panel. 2. Remove the secondary access panel. a. Remove the four screws that secure the panel (1). Keep these screws for later reinstallation. b. Slide the panel backward to release it from the chassis (2). c. Remove the secondary access panel from the chassis (3). 3. Place the secondary access panel in a safe place for reinstallation later. Removal and replacement procedures 33
![](/manual_guide/products/hewlettpackard-dl120-proliant-dl120-generation-5-server-maintenance-service-guide-27dbcac/33.png)
Removal and replacement procedures
33
Secondary access panel
The signal and power cable connections of the system drives are shielded by the secondary access
panel. This panel must be removed when configuring the system drives.
To remove the secondary access panel:
1.
Remove the primary access panel.
2.
Remove the secondary access panel.
a.
Remove the four screws that secure the panel (
1
).
Keep these screws for later reinstallation.
b.
Slide the panel backward to release it from the chassis (
2
).
c.
Remove the secondary access panel from the chassis (
3
).
3.
Place the secondary access panel in a safe place for reinstallation later.