HP LaserJet M9040/M9050 HP LaserJet M9040/M9050 MFP - Software Technical Refer - Page 169
Flip s up, Booklet layout, Left Edge Binding
View all HP LaserJet M9040/M9050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
◦ Envelope DL ◦ Envelope C5 ◦ Envelope B5 ◦ Envelope Monarch ◦ Double Japan Postcard Rotated The duplexing unit in the product prints on two sides of a sheet of paper when the Print On Both Sides option is specified in the print job. To achieve the best print quality when printing on the second side of the page, the product makes adjustments to its print modes. Selecting a media type, in effect instructs the product to use a group of settings (such as fuser temperature and print speed) to create an image that has the best possible quality for that media. This group of settings is known as print mode. A different print mode is used with each media type. Print-mode adjustments for the second side of a duplexed page are automatic. Flip pages up Use the Flip pages up check box to specify the duplex-binding option. By default, the Flip pages up check box is available only when the Print On Both Sides option is selected. The following table demonstrates the results of selecting this check box, depending on the media orientation selected on the Finishing tab. Table 4-4 Page orientation Orientation (Finishing tab) Flip Pages Up selected Flip Pages Up not selected Portrait Short-edge binding Long-edge binding Landscape Long-edge binding Short-edge binding When the Print On Both Sides option is selected, the document preview image changes to show a spiral binding along either the left edge or the top edge of the page. In addition, a folded-over corner appears in the lower-right portion of the preview image, indicating that printing occurs on the back side. An arrow on the folded-over corner points in the direction that the pages would be flipped if they were bound together. Short-side binding is for print jobs with pages that read by flipping over like the pages of a calendar. Long-side binding is for print jobs with pages that read by turning like the pages of a book. Booklet layout The Booklet layout drop-down menu, visible when the Print On Both Sides option is selected, offers the following options: ● Off (default) ● Left Edge Binding ● Right Edge Binding Selecting the Left Edge Binding or Right Edge Binding option changes the document preview image to show the location of the binding. If the Pages per sheet setting is on the default setting of 1 page HP PCL 5, PCL 6, and PS emulation drivers for Windows ENWW Finishing tab features 151