HP LaserJet Pro CP1525 Service Manual - Page 107
Cyan Very Low, Press [OK]
View all HP LaserJet Pro CP1525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Control panel message Cyan in wrong position Status alert Cyan Very Low Device error Press [OK] Front door open Genuine HP supply installed Incorrect supplies Install cartridge ENWW Description Recommended action The print cartridge is installed in the incorrect slot. Make sure that each print cartridge is installed in the correct slot. From front to back, the print cartridges are installed in this order: black, cyan, magenta, and yellow. The print cartridge is at the end of its useful life, and the At Very Low menu item in the System Setup menu is set to Continue. To ensure optimal print quality, HP recommends replacing the print cartridge at this point. You can continue printing until you notice a decrease in print quality. Actual cartridge life may vary. An internal error occurred. Once an HP supply has reached "very low", HP's premium Protection Warranty on that supply has ended. All print defects or cartridge failures incurred when an HP supply is used in continue at very low mode will not be considered to be defects in materials or workmanship in the supply under the HP Print Cartridge Warranty Statement. Press the OK button to resume the job. The product front door is open. Close the door. If the problem is not solved, follow these steps. 1. Reconnect the connector of the DC controller PCA (J115). 2. Check the sensor flag of the front door. If the sensor flag is damaged, replace the front door unit. A genuine HP supply was installed. This message will appear briefly after the supply is installed and then be replaced by the message Ready. No action necessary. More than one print cartridge is installed in the incorrect slot. Be sure that each print cartridge is in the correct slot. From front to back, the print cartridges are installed in this order: black, cyan, magenta, yellow. The print cartridge is either not installed or not correctly installed in the product. Install the print cartridge. Tools for troubleshooting 89