HP LaserJet Pro CP1525 Service Manual - Page 56
wire-harness connectors: J012, J104, J110, and J124
View all HP LaserJet Pro CP1525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
● Rear-upper cover. See Rear-upper cover on page 22. ● Top cover. See Top cover on page 25. 2. Release two tabs (callout 1), and then remove the protective cover (callout 2). Figure 1-57 Remove the DC controller PCA (1 of 3) 1 2 3. Disconnect all of the FFCs and wire-harness connectors from the DC controller PCA. ● Three FFCs: J107, J108, and J115 ● Wire harness ◦ 15 wire-harness connectors: J012, J104, J105, J109, J110, J111, J112, J113, J116, J117, J118, J119, J120, J121, and J124 NOTE: J126 and J127 are not used. Figure 1-58 Remove the DC controller PCA (2 of 3) 38 Chapter 1 Removal and replacement ENWW
●
Rear-upper cover. See
Rear-upper cover
on page
22
.
●
Top cover. See
Top cover
on page
25
.
2.
Release two tabs (callout 1), and then remove the protective cover (callout 2).
Figure 1-57
Remove the DC controller PCA (1 of 3)
1
2
3.
Disconnect all of the FFCs and wire-harness connectors from the DC controller PCA.
●
Three FFCs: J107, J108, and J115
●
Wire harness
◦
15 wire-harness connectors: J012, J104, J105, J109, J110, J111, J112, J113, J116,
J117, J118, J119, J120, J121, and J124
NOTE:
J126 and J127 are not used.
Figure 1-58
Remove the DC controller PCA (2 of 3)
38
Chapter 1
Removal and replacement
ENWW