HP LaserJet Pro CP1525 Service Manual - Page 68
formatter PCA out of the way, and hold the formatter PCA out and away from the chassis.
View all HP LaserJet Pro CP1525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
7. Release the wire harness (callout 10) from the retainer. Figure 1-75 Remove the power supply (low-voltage; 6 of 10) 10 8. Release two tabs (callout 11), and then carefully remove the retainer (callout 12). NOTE: It might be easier to remove this retainer if you first move the cable that connects the formatter PCA out of the way, and hold the formatter PCA out and away from the chassis. Figure 1-76 Remove the power supply (low-voltage; 7 of 10) 11 12 50 Chapter 1 Removal and replacement ENWW
7.
Release the wire harness (callout 10) from the retainer.
Figure 1-75
Remove the power supply (low-voltage; 6 of 10)
10
8.
Release two tabs (callout 11), and then carefully remove the retainer (callout 12).
NOTE:
It might be easier to remove this retainer if you first move the cable that connects the
formatter PCA out of the way, and hold the formatter PCA out and away from the chassis.
Figure 1-76
Remove the power supply (low-voltage; 7 of 10)
11
12
50
Chapter 1
Removal and replacement
ENWW